|
|
Steam boiler burning fytomass waste
Plot, Rostislav ; Skála, Zdeněk (advisor)
This thesis deals with the calculation of the boiler on stillage. Nowadays, when there's fossil fuels are just biomass seems adequate compensation. The great advantage of biomass boilers is a small amount of emissions, especially the greenhouse gas CO2. Of a given fuel composition is made thermal calculation and dimensioning of heat transfer surfaces of steam boilers. The resulting calculation must follow the parameters of steam at the outlet from the boiler.
|
|
|
Steam boiler for spruce bark burning-18t/h
Dračka, Lukáš ; Heinze, Bedřich (referee) ; Skála, Zdeněk (advisor)
To design a grate boiler with a natural circulation for burning of a pine bark with an output 18t/h is a primary objective of this dissertation. Individual parts of a boiler and it´s heat transfering surfaces were calculated after the working out of stoichiometric calculations from given element analysis of fuel. All computations have to fulfill several parameters: boliler output, temperature and pressure of an overheated steam.
|
|
|
Hotwater boiler for natural gas,60 MW, 1,6 MPa, 150/70°C
Gardavský, Jan ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
The aim of this thesis is design a hotwater boiler for burning natural gas with an output of 60 MW. Boiler works with temperature difference 150 °C / 70 °C. For a given fuel is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of hot water and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
| |
|
|
Grate Biomass Boiler
Michalica, Martin ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
This thesis deals with the design grate boilers with natural circulation for the combustion of contaminated biomass. The boiler output is output 45 t/h. Produced superheated steam with the output parameters of 440 °C 4,2 at MPa feed water temperature 115 °C. The stoichiometric calculations and the thermal calculation are based on the specified fuel composition. Thanks to this, the basic dimensional design of the boiler and its efficiency are determined. Calculation of this work focuses mainly on thermal calculations and dimensional design of individual heat transfer surfaces. Basic drawing of the boiler is available in the attachment of the thesis.
|
|
|
Stean boiler for sub bituminous coal, steam parametres 235 t/h, 14 MPa, 540°C
Horák, Stanislav ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
The aim of the work is to design a brown coal combustion boiler of 235 t/h output. The work is divided into several parts. First, stechiometric calculations and calculations enthalpy of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, individual heating surfaces are proposed and at the end of the calculations are controlling the overall energy balance of the boiler. For calculation was design documentation added.
|
|
| |
|
|
Design of the steam generator for modular reactor
Černý, Marian ; Baláš, Marek (referee) ; Šen, Hugo (advisor)
Subject of this thesis is design of the steam generator for modular reactor. The dissertation consist of the theoretical part, where are described heat-exchangers and steam generators used in nuclear power plants. Second part contains theoretical calculations in the first approach (thermal, hydraulic and strenght calculation). In the next part are particular variants of steam generator selected. For the final variant are necessary calculations (introduced above) and drawings of selected parts are done. In the final statement is technical solution evaluated, and the parameters of the steam generator are compared with actually used steam generators.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
guest ::
